|
|||||||
|
|||||||
|
|
|
|||||||
|
|||||||
|
|
| UPC4062G2-E2资料 | |
|
UPC4062G2-E2 PDF Download |
|
File Size : 116 KB
Manufacturer:NEC Description: The VCC supply to each optoisolator must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic or solid tantalum capacitor with good high frequency characteristic and should be connected as close as possible to the package VCC and GND pins of each device. 2. Each channel. 3. Enable Input - No pull up resistor required as the device has an internal pull up resistor. 4. tPLH - Propagation delay is measured from the 3.75 mA level on the HIGH to LOW transition of the input current pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. 5. tPHL - Propagation delay is measured from the 3.75 mA level on the LOW to HIGH transition of the input current pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. 6. tr - Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse. 7. tf - Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse. 8. tELH - Enable input propagation delay is measured from the 1.5 V level on the HIGH to LOW transition of the input voltage pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. 9. tEHL - Enable input propagation delay is measured from the 1.5 V level on the LOW to HIGH transition of the input voltage pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. 10. CMH - The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., VOUT > 2.0 V). Measured in volts per microsecond (V/µs). 11. CML - The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the low output state (i.e., VOUT < 0.8 V). Measured in volts per microsecond (V/µs). 12. Device considered a two-terminal device: Pins 1,2,3 and 4 shorted together, and Pins 5,6,7 and 8 shorted together. |
|
| 相关型号 | |
| ◆ Z9036112PSC | |
| ◆ Z86C6116PSC | |
| ◆ Z84C3006PEC | |
| ◆ Z0861505PSC | |
| ◆ XTR110KP | |
| ◆ XTR106UA | |
| ◆ XTR105UA | |
| ◆ XTR101AP | |
| ◆ XN4601 | |
| ◆ XN4501 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：UPC4062G2-E2 厂 家：NEC 封 装：SOP-8 批 号：01+ 数 量：1013 说 明： |
|||||
|
运 费：广东省内10元(平邮),广东省外20元(快递) 所在地：深圳市 新旧程度： |
|||||
| 联系人：黄林锋 |
| 电 话：0755-82579969,83255343 |
| 手 机：13714599954, |
| QQ：172517499,137550090 |
| MSN：zfdz168@hotmail.com |
| 传 真：0755-82738881 |
| EMail：zfdz168@163.com |
| 公司地址： 深圳市福田区华强北路华强广场B座28楼L室 |
